Table of Contents
Advertisement
CDM-Qx Satellite Modem
Front Panel Operation
(Config%Remote%Serial%Baudrate)
Selecting Baud Rate presents the user with the following menu:
M&C Serial Bus Baud Rate:
19200 Baud
Values of 2400, 4800, 9600, 19200, 38400, and 57600 baud are possible. Edit the baud
rate of the remote control bus connected locally to the M&C computer. The value is
changed using the )( arrow keys, then pressing
Note that the asynchronous character format is FIXED at 8 data bits, 1 stop bit, no parity
(8-N-1).
(Config%Remote%Ethernet)
Selecting Ethernet displays the following:
Ethernet Config:
Gateway Address MAC SNMP
(Config%Remote%Ethernet%Gateway)
Selecting Gateway displays the following submenu:
M&C Ethernet IP Gateway:
192.128.001.001
Edit the IP Gateway Address for the Ethernet M&C port for this unit by selecting the digit
to be edited, using the ◄ ► arrow keys. The value of the digit is then changed using the
arrow keys, then pressing
▼
(Config%Remote%Ethernet%Address)
Selecting Address displays the following submenu:
M&C Ether IP Address/Range:
192.168.001.001/24 (◄ ►▲ ▼,ENT)
Edit the IP Address and Range for the Ethernet M&C port for this unit by selecting the digit
to be edited, using the ◄ ► arrow keys. The value of the digit is then changed using the
#$ arrow keys, then pressing
(▲ ▼,ENT)
ENTER
(◄ ►, ENT)
(◄ ►▲ ▼, ENT)
.
ENTER
.
ENTER
5–10
Revision 6
MN/CDMQx.IOM
.
▲
Advertisement
Table of Contents
