Kyocera Mita KM-1500 Service Manual page 68

Hide thumbs Also See for KM-1500:
Table of Contents

Advertisement

2DC
Problem
(9)
A paper jam in the
exit section is indi-
cated during copy-
ing (jam in the exit
section).
Jam code 50
1-5-6
Causes/check procedures
Defective registration sen-
sor.
Defective exit sensor.
Check if the lower exit
roller and exit pulleys con-
tact each other.
Check if the upper exit
roller and exit pulleys con-
tact each other.
Corrective measures
Run maintenance item U031 and turn registration sensor on and
off manually. Replace registration sensor if indication of the cor-
responding sensor is not light.
Run maintenance item U031 and turn exit sensor on and off
manually. Replace exit sensor if indication of the corresponding
sensor is not light.
Check visually and remedy if necessary.
Check visually and remedy if necessary.

Advertisement

Table of Contents
loading

Table of Contents