Removing The Thermal Cutout - Kyocera Mita KM-1500 Service Manual

(5) Removing the thermal cutout

CAUTION
• Do not bend the terminals of the thermal cutout.
1. Remove and split the fuser unit (See page 1-6-18).
2. Remove the heater lamp (See page 1-6-21).
3. Remove the heat roller (See page 1-6-22).
4. Remove the two screws.
5. Remove the thermal cutout.
Screws
Thermal
cutout
Figure 1-6-27 Removing the thermal cutout
2DC
1-6-25