Table of Contents
Advertisement
2DC
(6) Adjusting magnification of the scanner in the auxiliary scanning direction
Perform the following adjustment if the magnification in the auxiliary scanning direction is not correct.
U065
(main scanning
direction) (P. 1-6-45)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter "065" using the copy exposure
adjustment keys or zoom +/- keys.
Select "Exp. 2" (auxiliary scanning
direction) using the copy exposure
machine enters the test copy mode.
1-6-46
U065
(auxiliary scanning
direction)
Start
Enter maintenance mode.
Press the start key.
adjustment keys.
Press the program key and the
Place an original and press
the start key to make a test copy.
Is the image correct?
Yes
Press the stop/clear key to
exit maintenance mode.
End
U070
(P. 1-6-50)
Original
Press the start key.
For copy example 1, increase the
value using the zoom (+) key.
No
For copy example 2, decrease the
value using the zoom (–) key.
Setting range: –25 – +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
Copy
Copy
example 2
example 1
Figure 1-6-56
The new setting
is stored.
Advertisement
Table of Contents
