Table of Contents
Advertisement
Maintenance
item No.
U091
Checking shading
Description
Performs scanning under the same conditions as before and after shading is performed, displaying the original
scanning values at nine points of the contact glass.
Purpose
To check the change in original scanning values before and after shading. The results may be used to decide
the causes for fixing unevenness (uneven density) of the gray area of an image: either due to optical (shading
or CCD) or other problems.
Also to check the causes for a white or black line appearing longitudinally.
Method
1. Press the start key. A selection item appears.
2. Select the item to be operated using the zoom +/– keys.
Display
on
oFF
3. Press the start key. Scanning is performed under the selected conditions and the result is displayed.
4. Change the measurement point by lighting a copy exposure indicator or making one flash using the copy
exposure adjustment keys. For the correspondence between the measurement points and the copy
exposure indicators, see Figure 1-4-1.
Point
Operation
Performs scanning before shading and displays the result.
Performs scanning after shading and displays the result.
100 mm from the machine
center toward machine rear
Machine center
100 mm from the machine
center toward machine front
200 mm from the machine left
Copy exposure indicator
1
exp.1
exp.2
2
exp.1
exp.2
3
exp.1
exp.2
4
exp.1
exp.2
5
exp.1
exp.2
Description
1
4
7
150 mm from
machine left
300 mm from machine left
Point
Copy exposure indicator
6
exp.3
exp.1
7
exp.3
exp.1
8
exp.3
exp.1
9
exp.3
exp.1
exp.3
Figure 1-4-1
2
3
5
6
8
9
exp.2
exp.3
exp.2
exp.3
exp.2
exp.3
exp.2
exp.3
: Off
: On
: Flashing
2DC
1-4-13
Advertisement
Table of Contents
