Kyocera Mita KM-1500 Service Manual page 101

2DC
10. Remove the main board (See page 1-6-10).
11. Remove one screw and then remove the grounding plate.
12. Remove one screw and then remove the feed clutch.
13. Remove three stop rings.
14. Remove MP feed clutch (gear), feed clutch (gear), and registration clutch (gear).
MP feed clutch (gear)
Grounding
Stop ring
plate
Screw
Feed clutch (gear)
Stop ring
Screw
Registration clutch (gear)
Stop ring
Feed clutch
Figure 1-6-18 Removing the clutches
1-6-16