CHAPTER 11 TROUBLESHOOTING
17. Adjusting the Position of the Holding Tray Paper Jogging Plate Solenoid
Install the solenoid so that its stroke (end-to-end distance between rubber silencer
and solenoid) is 1.5 ±0.3 mm.
18. Drive Belt
Route the drive belt on the pulley and the roller as shown.
Registration feeding
drive belt
11-36
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
1.5±0.3mm
Figure 11-242
Drum drive belt
Figure 11-243
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Main motor
Fixing/waste toner
drive belt