Canon NP6251 Service Manual page 339

6) Remove the mounting screw
remove.
7) Remove the mounting screw
thermistor .
12. Removing the Lower Separation Claw Assembly
1) Slide out the fixing/feeding unit from the copier.
2) Remove the fixing/feeding assembly front cover.
3) Remove the flywheel.
4) Remove the fixing assembly upper cover.
5) Remove the fixing cleaning belt, clean the silicone oil pan; then, remove the fixing
assembly upper unit.
6) Remove the two mounting screws
assembly 2 together with its support plate
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and shift the thermistor assembly
Figure 6-224
and two retaining screws
Figure 6-225
, and remove the lower separation claw
Figure 6-226
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
, and remove the main
.
to the right to
6-31