Canon NP6251 Service Manual page 482

J. Image/Operation Checks and User Mode
Step
1 Connect the power plug to the power
outlet, and insert the door switch
actuator into
assembly of the front door.
2 Slide out the holding tray and the
holding tray feeding assembly, and
check to make sure that the parts are
not damaged or soiled with foreign
matter.
3 Slide out the paper deck and the
cassette to the front, and remove the
packing materials.
4 Set the side guide plate of each
cassette to the hole identified by
marking A (STMT-R).
Then, remove the face sheet from the
backing paper, and attach it in
reference to the front edge of the hole
identified by marking A while making
sure that the holes identified by
markings D, F, H, K, and L are fully
covered.
• Be sure that the entire sheet is in
firm contact.
• Do not cover the hole identified by
marking A.
Caution:
Do not perform this step if the user
is using Inch-configured paper.
5 Turn on the power.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Work
the door switch
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Remarks
Be sure to remove all packing materials before
turning on the power.
B
C
E
G
I
J
M
• Adjust the contrast of the control panel using
the image contrast key for better viewing.
(Advise the user how to use the key.)
• Check that the Add Paper indicator turns on.
• Enter a number (keypad) to check that the
copy count display is correct. (Press the
Clear key thereafter.)
Face sheet
A
D
F
H
K
L
9-27