5. Removing the External Delivery Paper Sensor and the Internal Delivery Paper
Sensor
1) Remove the external delivery roller.
2) Remove the two mounting screws
assembly and the internal delivery sensor assembly
6. Removing the Fixing Assembly Outlet Paper Sensor Assembly
1) Slide the fixing/feeding unit to the front; then, remove the front over and the fixing
assembly upper unit. (See p. 6-23.)
2) Remove the fixing assembly lower separation claw assembly. (See p. 6-31.)
3) Remove the mounting screw
assembly
to the right; then, disconnect the connector
sensor.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
; then, remove the external delivery sensor
Figure 6-238
, and slide the fixing assembly outlet paper sensor
Figure 6-239
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
.
(J108), and remove the
6-39