Canon NP6251 Service Manual page 783

Hide thumbs Also See for NP6251:

Table of Contents

CHAPTER 11 TROUBLESHOOTING

Use it to enable or disable the original size

detection function for the RDF.

ON: If the selected mode does not require detection

of original size (APS, AMS, frame erasing,

etc.), correction is made when assuming an

original size considering the paper size and the

selected ratio.

Use it to specify two-sided mode as the standard

mode (one-sided to two-sided). If '0' is selected, the

notation "two-sided" will not be indicated unless

'initialize standard mode' is selected in user mode.

Use it to register a non-default size for the

multifeeder.

Copies may be made only when the sorter is

not installed. (Otherwise, a sorter jam will

occur because of a paper length not suited

to the sorter.)

Use it to enable or disable potential control for the

first copying operation at power-on, after 10 min,

and after 60 min.

Download service manual and resetter printer at http://printer1.blogspot.com

CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

432 to 600 mm

Chapters

Table of Contents