Canon NP6251 Service Manual page 348

CHAPTER 6 FIXING SYSTEM
7. Removing the Internal Delivery Assembly Roller
1) Open the front door, and slide the fixing/feeding unit to the front and out of the copier.
2) Remove the fixing/feeding assembly front cover.
3) Remove the fixing assembly upper unit. (See p. 6-23.)
4) Remove the fixing assembly lower separation claw assembly. (See p. 6-31.)
5) Remove the E-ring
6) Remove the E-ring
7) Remove the E-ring
8) Remove the E-ring
9) Remove the fixing assembly outlet paper sensor assembly. (See p. 6-39.)
10) Remove the internal delivery roller.
6-40
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, gear , and parallel pin
and the bushing .
Figure 6-240
and the gear at the rear.
and the bushing .
Figure 6-241
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
at the front.