CHAPTER 8 PAPER DECK-A1
7) Insert a hex wrench
turning.
Caution:
If you fail to perform this step, the lifter cable will become slack when the lifter unit
is removed.
8) Remove the five screws
8-42
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
in the hole of the lifter drive shaft
Figure 8-411
, and remove the lifter motor unit
Figure 8-412
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
to keep the shaft from
.