Canon NP6251 Service Manual page 172

CHAPTER 4 IMAGE FORMATION SYSTEM
5. Adjusting the Height of the Charging Wire
Charging assembly
Primary
Pre-transfer
Transfer
Separation
Reference:
The height (position) of the primary and the transfer charging wires may be adjusted
by turning the screw behind the charging assembly. A full turn of the screw changes
the position of the charging wire by about 0.7 mm.
4-58
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Height of charging wire
7.5 +1.5
- 0 mm
9.5 +1.0
- 0 mm
16.2 ± 0.5 14.9 ± 0.5
mm mm
Figure 4-332
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Tolerance
± 1mm
7.5 +1.5
-0 mm A
No
mechanism
B
10.2 ± 0.5mm
± 2mm
C
± 2mm
D