CHAPTER 11 TROUBLESHOOTING
6. Cleaning the Cleaner Side Scraper
Perform the following steps whenever you have replaced the cleaning blade (every
500,000 copies).
1) Remove the cleaning blade.
2) Remove the paper lint collecting at the tip of the side scraper (gap
magnet roller and toner guide roller) with tweezers.
3) Remove the toner coated on the surface of the magnet roller. (Shape copy paper into
the letter U, and scoop up the toner.)
11-22
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Side scraper (rear)
Toner guide roller
Magnet roller
A
Remove waste toner collecting here.
Figure 11-225 (rear)
Remove waste toner collecting here.
A
Toner guide roller
Magnet roller
Side scraper (front)
Figure 11-225a (front)
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
(rear)
4~8mm
4~8mm
(front)
between