6. Removing the Fixing Heater
1) Slide out the fixing/feeding unit from the copier.
2) Remove the fixing/feeding front cover.
3) Open the fixing delivery assembly.
4) Remove the flywheel.
5) Remove the fixing upper cover, and remove the fixing web; then, clean the silicone
oil pan, and remove the fixing upper unit.
6) Remove the faston
7) Remove the mounting screw
at the front.
8) Free the two cables
9) Remove the two fastons
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
at the front of the heater (main heater, sub heater).
, and remove the side electrode supply leaf spring
at the front of the heater from the wire saddles
Figure 6-214
at the rear.
Figure 6-215
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
.
6-25