Dhcp Server Configuration - Planet IG-100 User Manual

Internet gateway
Table of Contents

Advertisement

Internet Gateway User Guide

DHCP Server Configuration

If you wish to use the DHCP Server in the Internet Gateway,
refer to DHCP Server on page 36. If you already have a DHCP
Server, check the following:
IP Address
The IP Addresses assigned to PCs must be from the same
address range as the Internet Gateway's Device IP Address.
For example, if the Internet Gateway uses the default IP Ad-
dress (192.168.0.1) and Network Mask (255.255.255.0), the
PCs must use addresses from 192.168.0.2 to 192.168.0.254.
Network Mask
All PCs, and the Internet Gateway, need to be using the same
value for the Network Mask. The default value is
255.255.255.0.
Gateway
This depends on whether your LAN has a router:
No Router. Set the Default Gateway Address to the IP
address (Device IP Address) assigned to the Internet
Gateway during configuration. The default IP Address is
192.168.0.1.
Router. Do not change the Default Gateway Address.
Instead, configure the router to use the Internet Gateway as
its "Default Route".
DNS (Domain Name Server) Address
This must match the DNS address entered into the DNS IP
Address field of the Internet Gateway during configuration.
22

Advertisement

Table of Contents
loading

Table of Contents