Table of Contents
Advertisement
Internet Gateway User Guide
Problem 2
Solution 2
64
192.168.0.254 and thus compatible with
the Internet Gateway's default IP Ad-
dress of 192.168.0.1.
In Windows, you can check your PC's
IP Address by using Control Panel-
Network to check the Properties for the
TCP/IP protocol.
When I enter a URL or IP address I get a
time out error.
A number of things could cause this. Try the
following troubleshooting steps.
1. If this is first time you have used your
browser, ensure that your workstations
IP settings are correct, including IP ad-
dress, default gateway and DNS.
2. Ping the Internet Gateway. Use the
"Run" command to enter the following
command:
Ping xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address
assigned to the Internet Gateway's LAN
interface.
3. If the ping command fails, check that
the Internet Gateway is connected and
ON. If it is connected and on, there is a
problem with your LAN.
4. Check that Port is "Enabled" (Advanced
Port Settings). If not, you need to use
the HTML program to establish a con-
nection.
5. Run your Browser and connect to the
Internet Gateway.
6. Switch to the Status screen, and exam-
Advertisement
Table of Contents
