Table of Contents
Advertisement
IG-100
Figure 2: IG-100 1-port IP Sharing Device
Item
1
Power port
2
10BaseT port
3
10Base2 port
4
Serial Port
5
DIP switches
6
Error LED
7
Link LED
Internet Gateway
Description
Insert the power adapter plug here.
Connect 10BaseT cabling here.
Connect 10Base2 cabling here.
Connect the modem to this port.
Refer to the following Dip Switches
Table.
Indicates an error, but will normally
light up during power On. See the
LED Status Table for more details.
This LED should be ON during
normal operation. See the following
LED Status Table for more details.
Introduction
Advertisement
Table of Contents
