Chapter 4 NAT Setting
VGW-400 Series can support NAT, 2 Ethernet ports (management mode) or bridge mode.
Here is the setting for NAT related service.
4.1 DHCP Srv.(DHCP Server)
Item
DHCP Server
Client Range Start
IP
Client Range End IP
Default Gateway
Submask
DNS Server 1
DNS Server 2
4.2 UPNP (Universal Plug and Play server)
Item
UPNP Server
Explanation
Enable DHCP server or not.
Specify DHCP client lease start IP
Specify DHCP client lease end IP
Specify the default gateway
Specify the subnet mask.
Specify the DNS server 1 address
Specify the DNS server 2 address
Explanation
Enable UPNP server or not.
33
Internet Telephony Gateway
VGW-400 Series