Planet IG-100 User Manual page 13

Internet Gateway User Guide
During power up, the unit automatically detects the type of
network cable and adjusts to that environment. Simply connect
the cable to the Internet Gateway in the normal manner.
3. Connect Modem & Phone Line
Connect the modem, using a standard serial cable, to the
Internet Gateway's serial port. Connect the modem to the
phone line.
4. Connect Power Adapter
Connect the modem's power adapter to the modem and the
Internet Gateway's power adapter to the Internet Gateway.
Power both devices On.
5. Check the LEDs
When the Internet Gateway is powered On, both the Error and
Link LEDs should light, then the Error LED should go off. The
Link and Port LEDs will flash during normal operation.
If the Error LED stays on, there is a hardware problem. For
more information on the LEDs, refer to the LED Status Table
on page 6.
10
Do not connect both types of cable or
change the network cable while the
Internet Gateway is powered On.
Only use the power adapter provided.
Using a different one may cause hard-
ware damage.