Planet IG-100 User Manual page 16

Connecting to the Internet Gateway
To establish a connection from your PC to the Internet Gate-
way:
1. Start your WEB browser
2. In the Address box, enter "HTTP://" and the IP Address of
the Internet Gateway, as in the following example:
3. You should then see the Home screen. Select the desired
option from the navigation bar.
If you can't connect
If the Internet Gateway does not respond, check the follow-
ing:
•
The Internet Gateway is properly installed, LAN con-
nections are OK, and it is powered ON.
•
Ensure that your PC and the Internet Gateway are on the
same network segment. (If you don't have a router, this
must be the case.)
•
Ensure that your PC is using an IP Address within the
range 192.168.0.2 to 192.168.0.254 and thus compatible
with the Internet Gateway's default IP Address of
192.168.0.1. Also, check that the Network Mask is set to
255.255.255.0
In Windows, the IP Address and Network Mask can be
checked by using Control Panel-Network to check the
Properties for the TCP/IP protocol.
HTTP://192.168.0.1
Configuration