Table of Contents
Advertisement
PC Configuration
To use DHCP, you must also configure your PCs to act as
DHCP clients. Client support for DHCP is provided in Win
95's TCP/IP stack. The procedure for enabling this is detailed
below.
For operating systems other than Win 95, check your system
documentation.
Windows 95 DHCP Client Configuration
1. Select the Control Panel - Network option on the Start
Menu. You should see a screen like the following.
Figure 8: Network Configuration
2. Select the TCP/IP protocol for your network card. Then
click on the Properties button, and the IP Address tab. You
should then see a screen like the following.
Device Options
Advertisement
Table of Contents
