Led Status Table; Dip Switches Table - Planet IG-100 User Manual

Internet Gateway User Guide

LED Status Table

The following table details the operation of the Link and Error
LEDs.
Link
On
On
Flashing
Rapid intermittent
flashing of each LED

DIP Switches Table

DIP Switch Setting
A
B
C
D
6
Error
On During power On, both LEDs
should light, then the Red LED
should go off. If both LEDs stay on,
there is a hardware problem.
Off Power On Self Test OK.
Off Normal Operation (Receiving
Packets from LAN).
Hardware error. Contact your
dealer for technical support.
1=off Normal Operation.
2=off
1=off Normal Operation.
2=on
1=on Restore Default IP Address and
2=off clear Password. (See next section)
1=on Normal Operation.
2=on
Description
Description