Table of Contents
Advertisement
Internet Gateway User Guide
Script File
If your ISP uses a standard PPP connection and authentication,
you do NOT need a script file.
Script files are used to automate the log-in process for ISPs that
use non-standard log-ins or proprietary security measures. For
example, if you connect to the Internet via CompuServe, you
DO need a script file.
Script File Commands
Three commands, listed below, can be used within a script file.
Note the following points:
•
Items in [ ] are optional, and the [ ] themselves are NOT
used.
•
Strings must be enclosed in double quotes.
•
There must be spaces between commands and parameters
(delay times and strings).
Send [msec] string
Wait msec
Wait [msec] string
28
Send the characters in string, with a.
msec (milliseconds) delay between
the sending of each character.
Wait for msec milliseconds before
executing the next script line.
Wait for msec milliseconds to receive
the string. If the string is not received
within the specified time, the con-
nection is reset.
If msec is not specified and the string
is not received immediately, an error
condition will arise.
Advertisement
Table of Contents
