Planet IG-100 User Manual page 10

Restore Default IP Address
and Clear Password
If the Internet Gateway's IP Address or password is lost, the
following procedure can be used to recover from this situation.
1. Turn the power to the Internet Gateway OFF.
2. Set the DIP switches to position C.
3. Turn the power to the Internet Gateway ON.
4. Operate the DIP switches in the following sequence (you
have 15 seconds to complete the sequence):
•
Set to A
•
Set to C
•
Set to A
5. The Internet Gateway will now reset, and the Red LED
flash. The following changes will have been made. (Other
configuration data is unchanged.)
•
IP Address set to its default value of 192.168.0.1
•
Network Mask set to 255.255.255.0
•
The password cleared (no password).
6. You can now connect to the Internet Gateway and make
any configuration changes required.
If the DIP switches are simply left at posi-
tion "C", the Internet Gateway will function
normally.
Introduction