Device Password; Lan Settings - Planet IG-100 User Manual

Internet Gateway User Guide

Device Password

Once a password is entered, it is required in order to change the
device configuration. Passwords are case sensitive and can be
up to 8 alphanumeric characters (no spaces or punctuation).
To create or change the password, enter the required password
in both the New Password and Verify Password input fields.
If the password is lost, a DIP switch setting
is available to clear the password. See the
DIP Switches Table on page 6 for details.

LAN Settings

For most users, the default values for these fields should not
need to be changed.
Device
IP Address
Router
IP Address
Network
Mask
34
IP address for the Internet Gateway.
Use the default value of 192.168.0.1 unless:
•
The address is already in use.
•
Your LAN is using a different IP
address range (not 192.168.0.1 to
192.168.0.254). In this case, use an IP
Address from within the address range
used by your LAN.
If you have a router, enter its IP Address.
Otherwise, leave this at 0.0.0.0.
The default value 255.255.255.0 is standard
for small (class "C") networks.
For other networks, enter the Network Mask
value used by PCs on the same LAN seg-
ment as the Internet Gateway.