Removing The Board Unit; Removing The Adf Unit - Canon LaserBase MF5600 Service Manual

2) Remove the two front screws [1].
[1]
F-3-237
3) Remove the two screws on the back [1]. Slide the
scanner unit [2] to the back; then, remove it by
lifting it.
[1]
F-3-238
3.2.3.9 Removing the Board
Unit
1) Remove the four screws [1] on the back side of the
scanner unit. Ensure that the mounting plate [2]
does not get lost.
[2]
[1]
F-3-239
[2]
0006-3654
2) Open up the board unit [1] and take off the
connector at six spots (five if the unit is not
equipped with the fax function) [2] and three flat
cables [3].
[1]
[3]
[2]
F-3-240
3.2.3.10 Removing the ADF
Unit
1) First, take the cable on the back side of he scanner
unit off the cable guide.
2) Open up the ADF unit [1] and move the stopper [2].
3) Disengage the 3 claws [4] on the ADF front cover
[3] to remove the ADF front cover.
[1]
[4]
[3]
[4]
F-3-241
Chapter 3
[2]
0002-7780
[2]
3-55