Removing The Left Frame; Removing The Left; Removing The Gear Unit; Removing The Tooth-Missing Gear - Canon LaserBase MF5600 Service Manual

3.5.4.16 Removing the Left

Frame
1) Remove the cable [1] out of the cable guide.
2) Remove the three screws [2] and then removes the
left frame [3].
[3]
[2]
[1]
F-3-356
3.5.4.17 Removing the Left
Front Cover
1) Remove the two screws [1] and then removes the
left front cover [2].
[2]
[1]
F-3-357
0003-7798
[2]
0003-7730
3.5.4.18 Removing the Gear
Unit
1) Remove the 2 screws [1], and detach the drive plate
(small) [2].
[1]
F-3-358
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[2]
[1]
F-3-359
3.5.4.19 Removing the Tooth-
Missing Gear
1) Remove the 2 screws [1], and detach the gear
support [2].
[2]
[1]
F-3-360
Chapter 3
0002-7100
[2]
0002-7101
3-83