3.2.4.13 Removing the Scanner
Cover Unit
1) Remove the platen glass cover.
2) Remove the three screws [1].
3) Disengage the front claw [2] and the three claws on
the sides [3]. Lift up the scanner cover unit [4] a
little to disengage the other two claws [5]. Then
remove the scanner cover unit.
[5]
[3]
[1]
[2]
[1]
F-3-263
3.2.4.14 Removing the Flatbed
Motor Unit
1) Remove the two screws [1].
2) While watching the CCD unit drive belt [2]
carefully, remove the flatbed motor unit [3].
[2]
[3]
F-3-264
0002-7790
[4]
[3]
0002-7793
[1]
3.2.4.15 Removing the CCD
Unit
1) Remove the flat cable [1].
2) Lift the right side of the shaft [2] to release the stop.
Then slide it to release the stop on the left side also.
3) Remove the CCD unit [3] by pulling it out of the
shaft.
[3]
[1]
F-3-265
3.2.5 Flatbed Motor Unit
3.2.5.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.2.5.2 Removing the Reader
Right Front Cover
1) Open the platen glass cover [1].
2) Open the front cover [2], remove one screw [3], and
remove the reader right front cover [4].
[2]
F-3-266
Chapter 3
0006-5176
[2]
0002-7748
0002-7752
[1]
[4]
[3]
3-61