Removing The Top Cover; Removing The Stay; Removing The Right Frame; Removing The Plate - Canon LaserBase MF5600 Service Manual

Chapter 3
3) Remove the two screws on the back [1]. Slide the
scanner unit [2] to the back; then, remove it by
lifting it.
[1]
F-3-449
3.6.2.11 Removing the Top
Cover
1) Remove the two screws [1].
2) Remove the connector [2] of the DCNT board.
3) Remove the two claws [3] and remove the top cover
[4].
[1]
[3]
[2]
F-3-450

3.6.2.12 Removing the Stay

1) Remove the two screws [1] and then removes the
stay [2].
3-104
[2]
0006-3736
[4]
0002-7473
[1]
F-3-451
3.6.2.13 Removing the Right
Frame
1) Remove the three screws [1] and then removes the
right frame [2].
[1]
F-3-452

3.6.2.14 Removing the Plate

1) Remove the connector [1] of the DCNT board.
2) Remove the three screws [2] and then removes the
plate [3].
[3]
[2]
F-3-453
[2]
0002-7474
0006-3730
[1]