Scnt Board; Operation Panel Unit; Removing The Reader Left; Removing The Operation Panel Unit - Canon LaserBase MF5600 Service Manual

Chapter 3
3.1.9.2 Removing the Reader
Left Front Cover
1) Open the platen glass cover [1].
2) Open the front cover [2] and the ADF part [3],
remove one screw [4], and remove the reader left
front cover [5].
[3]
[5]
[4]
[2]
F-3-56
3.1.9.3 Removing

Operation Panel Unit

1) Remove the two screws [1].
2) Disengage the claw [3] on the rear right side of the
operation panel unit [2] and lift it up.
removing the two flat cables, remove the operation
panel unit.
[1]
[2]
F-3-57
3-14
0002-7713
[1]
the
0002-7714
After
[3]

3.1.10 SCNT Board

3.1.10.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.1.10.2 Removing the Reader
Right Front Cover
1) Open the platen glass cover [1].
2) Open the front cover [2], remove one screw [3], and
remove the reader right front cover [4].
[2]
F-3-58
3.1.10.3 Removing the Right
Cover
1) Remove the two screws [1] on the back side.
[1]
F-3-59
0006-2984
0006-2985
[1]
[4]
[3]
0006-2986