Speaker; Removing The Toner Sensor; Removing The Cassette; Removing The Reader Right - Canon LaserBase MF5600 Service Manual

Chapter 3
3.1.19.7 Removing the Left
Front Cover
1) Remove the two screws [1] and then removes the
left front cover [2].
[2]
[1]
F-3-180
3.1.19.8 Removing the Toner
Sensor
1) Remove the connector [1] on the DCNT board.
(The external cover is omitted from the illustration
below to show the instructions clearly.)
2) Remove the screw [2] and remove the toner sensor
[3].
[1]
[2]
F-3-181

3.1.20 Speaker

3.1.20.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.1.20.2 Removing the Reader
Right Front Cover
1) Open the platen glass cover [1].
3-42
0002-7704
0006-3057
[3]
0006-3757
0006-3758
2) Open the front cover [2], remove one screw [3], and
remove the reader right front cover [4].
[2]
F-3-182
3.1.20.3 Removing the Right
Cover
1) Remove the two screws [1] on the back side.
[1]
F-3-183
2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the right side of the unit and remove
the cover as if you were opening the bottom side of
the right cover [3].
F-3-184
[1]
[4]
[3]
0006-3759
[2]
[3]
[1]