Specifying The Memory Rx Mode; Releasing The Memory Rx Mode - Konica Minolta bizhub 215 User Manual

7.5 Fax RX setting
7.5.2

Specifying the memory RX mode

1
2
3
4
5
6
7
7.5.3

Releasing the memory RX mode

The memory RX mode is released automatically at the ending time, and the received original is printed out.
If the ending time is not specified or if you want to release the memory RX mode before the ending time, follow
the steps shown below.
1
2
3
4
5
bizhub 215
Downloaded From ManualsPrinter.com Manuals
Press the Utility key.
Use +, to select [FAX RX OPERATION], and press the OK key.
Use +, to select [MEMORY RX MODE], and press the OK key.
Use +, to select [ON], and press the OK key.
Enter the starting time using the Keypad, and press the OK key.
Enter the ending time using the Keypad, and press the OK key.
Enter a 4-digit password using the Keypad, and press the OK key.
% When not registering a password, press the OK key without entering any digits.
This returns to the fax RX settings screen.
Press the Utility key.
Use +, to select [FAX RX OPERATION], and press the OK key.
Use +, to select [MEMORY RX MODE], and press the OK key.
Use +, to select [OFF], and press the OK key.
% If a password is specified, go to the next step.
% If a password is not specified, the received original in the memory is printed out, and the display
returns to the fax RX settings menu.
Enter a 4-digit password using the Keypad, and press the OK key.
This returns to the fax RX settings screen.
7
7-23