Changing Or Deleting A One-Touch Dial Destination - Konica Minolta bizhub 215 User Manual

7.2 Store Address
8
9
10
7.2.3

Changing or deleting a one-touch dial destination

1
2
3
4
5
6
d
For details on how to change each setting, refer to Steps 6 to 8 in page 7-5.
bizhub 215
Downloaded From ManualsPrinter.com Manuals
Use +, to select a setting item, and press the OK key.
% If [SUB, SID SETTING] is selected: Enter the SUB address and password, and press the Back key.
% The SUB address and password can be specified using up to 20 digits.
% When [MODEM SPEED] is selected: Use +, to select [33.6Kbps], [14.4Kbps], or[9.6Kbps], and
press the Back key.
% If [BATCH TIME] is selected: Enter the transmission time using the Keypad, and press the Back key.
% Repeat this procedure until all the required settings are completed.
Select [RETURN], and press the OK key.
This returns to the screen where a fax number can be entered.
Press OK.
This registers settings, and returns to the Store Address screen.
Press the Utility key.
Use +, to select [DIAL REGISTRATION], and press the OK key.
Use +, to select [ONE-TOUCH DIAL], and press the OK key.
Press the One-Touch Dial Key you want to change or delete.
Use +, to select [EDIT] or [DELETE], and press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the One-Touch Dial Key is deleted, and the
display returns to the Store Address screen.
Change the destination name, fax number, F code (SUB address or password), or baud rate.
After all settings are completed, the display returns to the Store Address screen.
Reference
7
7-7