Konica Minolta bizhub 215 User Manual page 86

6.2 Installing the fax driver
12
13
14
15
Creating a new port using the Add Printer wizard to install the fax driver
0
0
1
2
3
4
5
6
7
8
9
10
11
12
bizhub 215
Downloaded From ManualsPrinter.com Manuals
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue] or [Yes].
% When the Verify the publisher dialog box of [Windows Security] appears, click [Install this driver soft-
ware anyway].
Click [Finish].
After installation has been finished, check that the icon of the installed fax is displayed on the [Printers]
or [Devices and Printers] window.
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
Administrator authority is required for installation.
Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
Insert the fax driver CD-ROM into the CD-ROM drive of the computer.
Click [Start], then [Control Panel].
Select the desired printer function in [Hardware and Sound].
% In Windows Vista/Server 2008, click [Printers] under [Hardware and Sound]. If [Control Panel] is dis-
played in Classic View, double-click [Printers].
% In Windows 7/Server 2008 R2, click [View devices and printers] under [Hardware and Sound]. If
[Control Panel] appears in the icon display, double-click [Devices and Printers].
On the toolbar, select the additional printer information.
% Click [Add a printer] on the toolbar.
The [Add Printer] wizard appears.
Click [Add a local printer].
The [Choose a printer port] dialog box appears.
Click [Create a new port:], and then select the port type.
% To use the LPR/Port 9100 protocol, select [Standard TCP/IP Port].
Click [Next].
Specify the IP address.
% To use the LPR/Port 9100 protocol, select [TCP/IP Device], and enter the IP address.
Click [Next].
% If the [Additional Port Information Required] or [More Port Information Required] window appears,
go to Step 10.
% If the [Install the printer driver] dialog box appears, go to Step 13.
Check [Custom] and click [Settings...].
Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
% If both LPR and Port 9100 are enabled on this machine, the fax driver is connected to this machine
using LPR.
Click [Next].
The [Install the printer driver] dialog box appears.
6
6-9