4.1
Transmission with F-Code (F-Code TX)
4.1.2
Specifying an F code to register a destination
When registering one-touch dial or speed dial, specify an F code.
1
2
3
4
5
6
bizhub 215
Downloaded From ManualsPrinter.com Manuals
Enter a destination fax number using the Keypad.
Press ,.
Use +, to select [SUB, SID SETTING], and press the OK key.
Enter a SUB address using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
% When entering a password, go to Step 5.
% When not entering a password, press the OK key, and go to Step 6.
Enter the password using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
Press OK.
Continuously, register other items.
4
4-3