Changing Or Deleting A One-Touch Dial Destination - Konica Minolta bizhub 306 User Manual

7
8
Use the +/, key to select a setting item, then press the OK key.
% If [SUB, SID SETTING] is selected: Enter the SUB address and password, then press the Back key.
% The SUB address and password can be specified using up to 20 digits.
% When [MODEM SPEED] is selected: Use the +/, key to select [33.6Kbps], [14.4Kbps], or [9.6Kbps],
then press the Back key.
% If [BATCH TIME] is selected: Enter the transmission time using the Keypad, then press the Back
key.
% Repeat this procedure until all the required settings are completed.
9
Select [RETURN], then press the OK key.
This returns to the screen where a fax number can be entered.
10
Press the OK key.
This registers settings, and returns to the Store Address screen.
7.2.3

Changing or deleting a one-touch dial destination

1
Press the Utility key.
2
Use the +/, key to select [DIAL REGISTRATION], then press the OK key.
3
Use the +/, key to select [ONE-TOUCH DIAL], then press the OK key.
4
Press the One-Touch Dial Key you want to change or delete.
5
Use the +/, key to select [EDIT] or [DELETE], then press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the One-Touch Dial Key is deleted, and the
display returns to the Store Address screen.
6
Change the destination name, fax number, F code (SUB address or password), or baud rate.
After all settings are completed, the display returns to the Store Address screen.
d
Reference
For details on how to change each setting, refer to Steps 6 to 8 in page 7-7.
7-8
SUB,SID SETTING
SUB
SID
BATCH TIME
TIMER
Store Address 7.2
bizhub 306/266