Receiver Buttons And Leds - Extron electronics eLink 100 User Manual

Receiver Buttons and LEDs

tron
K 100 T
LINK
VIDEO
POWER
REGISTER
RESET
Extron
eLINK 100 R
A A
B B
C C
D D
E E
Figure 7. eLink 100 R Receiver Top Panel
Power button — Hold this button to power on the eLink 100 receiver. The blue LED
A
behind this button lights to indicate that power is on.
NOTE: By default, the blue LED in this button lights and the receiver is powered on
when power is connected to the unit.
Register button — Press this button to initiate the registration process between the
B
receiver and transmitter (see
the next page).
Link LED — This blue LED blinks while the receiver is searching for a transmitter (see
C
Registering the Transmitter with the
LED lights steadily.
Video LED — This blue LED lights steadily when the transmitter and receiver are linked.
D
A A
POWER
B B
REGISTER
C C
LINK
D D
VIDEO
Registering the Transmitter with the Receiver
Receiver). When a link has been made, this
eLink 100 HDMI Transmitter and Receiver • Installation
on
9