Using The Setup Menu - Extron electronics eLink 100 User Manual

Direction arrows — The up and down arrow buttons scroll through menu items. The
D
right and left arrow buttons select characters when changing a video source name (see
Modifying a video source name
NOTE: In the OSD screen, the yellow arrows on the right (see
previous page) indicate that there are additional menu items to scroll through.
OK — Selects the menu item.
E
Delete — Displays the
F
transmitter
by selecting
Add — Begins the registration process (see
G
Receiver

Using the Setup Menu

Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
X
Figure 10.
The Setup menu enables you to set up the eLink 100 for operation. This menu includes the
following options:
•
Add new Video Source
The message
See Registering the Transmitter with the Receiver
procedure.
•
Remove Video Source
Unregistering a
•
Modify Video Source Name
source (see
•
Disconnect Wireless Link
displayed. Select this option to remove the connection between the source and the
display.
on the next page).
Choose Source to Remove
on the next page). This menu may also be accessed from the
.
Remove Video Source
on page 10).
Setup Menu
— Select this option to register the transmitter with a receiver.
Please Activate Registration on Transmitter Unit
— Select this option to unregister a transmitter (see
transmitter).
— Select this option to edit the name of an existing video
Modifying a video source name
— This appears on the menu only if the source is
eLink 100 HDMI Transmitter and Receiver • Operation
figure 9
submenu (see Unregistering a
Registering the Transmitter with the
for the rest of the registration
on the next page).
on the
menu
Setup
appears.
13