ZyWALL 10~100 Series Internet Security Gateway
Do not turn off the device while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute before logging into
the device again.
Figure 20-11 Configuration Upload Successful
The device automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 20-12 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer to be
in the same subnet as that of the default device IP address (192.168.1.1). See your Quick Start Guide for
details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration screen.
20-10
Maintenance