Figure 33-11 Wan & Lan Dhcp; Table 33-4 System Maintenance Menu Diagnostic - ZyXEL Communications ZyWall 10 User Manual

The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL and associated
connections.
FIELD
Ping Host
WAN DHCP Release
WAN DHCP Renewal
Internet Setup Test
Reboot System
Host IP Address=
Enter the number of the selection you would like to perform or press [ESC] to cancel.
System Information and Diagnosis
Figure 33-11 WAN & LAN DHCP

Table 33-4 System Maintenance Menu Diagnostic

Enter 1 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to the Internet Access chapter for
more details. This feature is only available for dial-up connections using
PPPoE or PPTP encapsulation.
Enter 11 to reboot the ZyWALL.
If you entered 1 in Ping Host, then enter the IP address of the computer
you want to ping in this field.
ZyWALL 10~100 Series Internet Security Gateway
DESCRIPTION
33-13