Configuring Local User Database; Table 6-3 802.1X Authentication - ZyXEL Communications ZyWall 10 User Manual

LABEL
Active
Reauthentication
Period
Apply
Reset

6.10 Configuring Local User Database

To change your ZyWALL's local user list, click WIRELESS LAN, then the Local User Database tab. The
screen appears as shown (some of the screen's blank rows are not shown).
Wireless LAN Screens

Table 6-3 802.1X Authentication

Select Force Authorized, Force UnAuthorized or Auto from the drop-down list box.
Select Auto to authenticate all wireless clients before they can access the wired
network.
Select Force Authorized to allow all wireless clients to access your wired network
without authentication.
Select Force UnAuthorized to deny all wireless clients access to your wired
network.
Specify the time interval between the RADIUS server's authentication checks of
wireless users connected to the network.
This field is activated only when you select Auto authentication control.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 10~100 Series Internet Security Gateway
DESCRIPTION
6-11