Configuring Dns; Table 16-5 Snmp - ZyXEL Communications ZyWall 10 User Manual
Zyxel zywall internet security gateway
Hide thumbs
Also See for ZyWall 10:
- User manual (254 pages) ,
- Reference manual (130 pages) ,
- Quick start manual (11 pages)
Table of Contents
Advertisement
LABEL
Trusted Host
If you enter a trusted host, your ZyWALL will only respond to SNMP messages from
this address. 0.0.0.0 (default) means your ZyWALL will respond to all SNMP
messages it receives, regardless of source.
Trap
Community
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Destination
Type the IP address of the station to send your SNMP traps to.
SNMP
Service Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Service Access
Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secured Client
A secured client is a "trusted" computer that is allowed to communicate with the
IP Address
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
16.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, for
example, the IP address of www.zyxel.com is 204.217.0.2. Refer to the Internet Access chapter for more
information.
To change your ZyWALL's DNS settings, click REMOTE MANAGEMENT, then the DNS tab. The screen
appears as shown.
Remote Management Screens
ZyWALL 10~100 Series Internet Security Gateway
Table 16-5 SNMP
DESCRIPTION
16-11
Advertisement
Table of Contents
