Configuring A Filter Set; Figure 31-4 Menu 21: Filter And Firewall Setup; Figure 31-5 Menu 21.1: Filter Set Configuration - ZyXEL Communications ZyWall 10 User Manual

Zyxel zywall internet security gateway

Hide thumbs Also See for ZyWall 10:

Table of Contents

ZyWALL 10~100 Series Internet Security Gateway

You can apply up to four filter sets to a particular port to block multiple types of packets. With each filter

set having up to six rules, you can have a maximum of 24 rules active for a single port.

31.2 Configuring a Filter Set

The ZyWALL includes filtering for NetBIOS over TCP/IP packets by default. To configure another filter

set, follow the procedure below.

Enter 21 in the main menu to open menu 21.

Enter 1 to bring up the following menu.

Select the filter set you wish to configure (1-12) and press [ENTER]

Menu 21 - Filter and Firewall Setup

1. Filter Setup

2. Firewall Setup

3. View Firewall Log

Menu 21.1 - Filter Set Configuration

-----------------

_______________

Enter Filter Set Number to Configure= 0

Edit Comments= N/A

Press ENTER to Confirm or ESC to Cancel:

Enter Menu Selection Number:

-----------------

_______________

Filter Configuration