Figure 180 Configuration Upload Successful; Figure 181 Network Temporarily Disconnected; Table 123 Restore Configuration - ZyXEL Communications P-660HN-F1 User Manual

Chapter 21 Tools
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from
your computer to your ZyXEL Device.

Table 123 Restore Configuration

LABEL
File Path
Browse...
Upload
Do not turn off the ZyXEL Device while configuration file upload is in progress.
After you see a "restore configuration successful" screen, you must then wait one minute
before logging into the ZyXEL Device again.

Figure 180 Configuration Upload Successful

The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 181 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
Appendix A on page 321
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
298
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
for details on how to set up your computer's IP address.
P-660HN-F1 User's Guide