Figure 31-14Filtering Dmz Traffic; Figure 31-15 Filtering Remote Node Traffic - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
Press ENTER to Confirm or ESC to Cancel:
31.6.3 Applying Remote Node Filters
Go to menu 11.5 (shown below – note that call filter sets are only present for PPPoE encapsulation) and
enter the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their
numbers separated by commas. The ZyWALL already has filters to prevent NetBIOS traffic from triggering
calls, and block incoming telnet, FTP and HTTP connections.
Press ENTER to Confirm or ESC to Cancel:
31-18
Menu 5.1 – DMZ Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=

Figure 31-14Filtering DMZ Traffic

Menu 11.5 – Remote Node Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=

Figure 31-15 Filtering Remote Node Traffic

Filter Configuration