Back To Factory Defaults; Figure 88 Configuration Upload Successful; Figure 89 Network Temporarily Disconnected - ZyXEL Communications Prestige 2302R User Manual

Prestige 2302R Series User's Guide
Table 56 Restore Configuration (continued)
LABEL
Browse...
Upload
Note: Do not turn off the device while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute
before logging into the device again.

Figure 88 Configuration Upload Successful

The device automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 89 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default management IP address (192.168.5.1).
See your Quick Start Guide or the appendices for details on how to set up your computer's IP
address.
If the upload was not successful, a Configuration Upload Error screen will appear. Click
Return to go back to the Configuration screen.

15.5.3 Back to Factory Defaults

Clicking the Reset button in this section clears all user-entered configuration information and
returns the Prestige to its factory defaults as shown on the screen. The following warning
screen will appear.
168
DESCRIPTION
Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
Chapter 15 Maintenance