Chapter 21 Tools
Do not turn off the P-793H v2 while configuration file upload is in
progress.
After you see a "restore configuration successful" screen, you must then wait one
minute before logging into the P-793H v2 again.
Figure 129 Configuration Upload Successful
The P-793H v2 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 130 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.1). See
your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 131 Configuration Upload Error
294
Appendix C on page 429
for details on how to set up
P-793H v2 User's Guide