Configuring Mac Filter - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
LABEL
Key 1 to If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters (ASCII
Key 4 string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters (ASCII
string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
There are four data encryption keys to secure your data from eavesdropping by unauthorized
wireless users. The values for the keys must be set up exactly the same on the access points
as they are on the wireless client computers.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
6.5

Configuring MAC Filter

The MAC filter screen allows you to configure the ZyWALL to give exclusive access to specific devices
(Allow Association) or exclude specific devices from accessing the ZyWALL (Deny Association). Every
Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the
factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to
know the MAC address of the devices to configure this screen.
To change your ZyWALL's MAC Filter settings, click WIRELESS LAN, then the MAC Filter tab. The
screen appears as shown
.
6-6
Table 6-1 Wireless
DESCRIPTION
Wireless LAN Screens